CHARACTERISTICS OF USES：
Reagents are set in the inner layer of double-layer glass reaction kettle, at the same time, vacuum can be taken out and mixing speed be adjusted. Interlayer can lead in refrigerating fluid, water and high temperature liquid to heat and cool the materials. It can be used in the experiment, middle-scale test, and production of chemistry, fine chemical engineering, biological pharmacy and synthesis of new materials. The products can be made into system devices with multi-purpose circulating water vacuum pump, diaphragm vacuum pump, low temperature circulating pump（vacuum）, circulating cooler, constant temperature circulator, low temperature cooling liquid circulating pump and closed cooling and heating circulating equipment.
●High borosilicate glass has good physical and chemical properties.
●Can be used in wide temperature range from high temperature （300℃）to low temperature（-80℃）。
●Can work in constant pressure and vacuum, vacuum degree is below 0.095MPa in quiet situation.
●Digital display of mixing speed, , frequency conversion, and constant speed mixing system, work steadily.
●The sealing method and materials between mixer shaft ,PTFE mixing propeller （paddle）,and ketttle cover are Know how of our company.
●Corrosion resistant discharge valve is without dead space design.
●The cooling or heating solution in the interlayer can be completely removed after reaction.
●The whole structure is novelty, practical and beautiful.
Technical data：
Model | GR-10L | GR-20L | GR-30L | GR-50L | GR-80L | GR-100L |
Power(W) | 60 | 90 | 90 | 120 | 180 | 180 |
Stirring speed (r/min) | 50～500 |
Max.torque(N·cm) | 132 | 200 | 200 | 273 | 378 | 378 |
Material capacity(L) | 10 | 20 | 30 | 50 | 80 | 100 |
Lnterlining cover capacity(L) | 3 | 6 | 10 | 16 | 24 | 30 |
Power supply (V/HZ) | 220/50 |
Glass cutter machine (designed for ITO glass and TLC plates)
The Glass Cutter was developed for cutting ITO Glass and other thin Glass in Laboratory. It will help to the research of organic solar cells, OLED, Electrochromic devices, et al.The Glass Cutter has two replaceable cutting wheels, can cut the glass with thichness of 0.5mm-1.5mm and 1mm-7mm respectively. Size of the Cutter: 370 mm * 370 mm.
Specifications:
Ø Division: <0.5 mm
Ø Working area: 28cm*33cm
Ø utter overall size: 37cm*37cm
